Honda AFRICA TWIN Owner'S Manual Download

Page: 264 / 377

Removal

CRF1100A/D

Remove the bolts A and washers. using

the hex wrench provided on the

underside of the rear seat.

P. 255

CRF1100A2/A4/D2/D4

Remove the bolt B, bolts A and washers.

using the hex wrench provided on the

underside of the rear seat.

P. 255

Remove the collar.

Remove the skid plate by releasing its

grommet from the prong.

Installation

Install the skid plate in the reverse order

of removal.

Install the collar.

Install the washers onto the bolts A.

Tighten the bolts A.

Torque:

26 N·m (2.7 kgf·m, 19 lbf·ft).

CRF1100A2/A4/D2/D4

Tighten the bolt B.

Torque:

12 N·m (1.2 kgf·m, 9 lbf·ft).

20190704203539_32MKS6000_eng_BOOK Page 263 Thursday, July 04 2019 20:57:26 JST

Removing & Installing Body Components

Skid Plate

Maintenance

258

Summary of Contents for AFRICA TWIN


























































































































































































































































































































































































Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands

Honda AFRICA TWIN, Owner'S Manual

Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands