background image

Aluminium Components

Aluminium will corrode from contact with dirt,

mud, or road salt. Clean aluminium parts

regularly and follow these guidelines to avoid

scratches:

Do not use stiff brushes, steel wool, or

cleaners containing abrasives.

Avoid riding over or scraping against curbs.

Panels

Follow these guidelines to prevent scratches

and blemishes:

Wash gently using a soft sponge and plenty

of water.

To remove stubborn stains, use diluted

detergent and rinse thoroughly with plenty

of water.

Avoid getting petrol, brake fluid, or

detergents on the instruments, panels, or

headlight.

Windscreen

Using plenty of water, clean the windscreen with

a soft cloth or sponge. (Avoid using detergents

or any kind of chemical cleaner on the

windscreen.) Dry with a soft, clean cloth.

NOTICE

To avoid possible scratching or other damage,

use only water and a soft cloth or sponge to

clean the windscreen.

For a dirtier windscreen, use a diluted neutral

detergent with a sponge and plenty of water.

Make sure to wash off all the detergent.

(Detergent residue may cause windscreen

cracks.)

Replace the windscreen if scratches cannot be

removed and they obstruct clear vision.

Take care to keep battery electrolyte, brake

fluid, or other chemical solvents off the

windscreen and screen garnish. They will

damage the plastic.

20190704203539_32MKS6000_eng_BOOK Page 353 Thursday, July 04 2019 20:57:26 JST

Caring for Your Vehicle

Information

348

Summary of Contents for AFRICA TWIN


























































































































































































































































































































































































Reviews: