Honda AFRICA TWIN Owner'S Manual Download

Page: 292 / 377

Adjusting the Front Suspension

Spring Preload

CRF1100A/A2/D/D2

You can adjust the spring preload by the

adjuster to suit the load or the road surface.

Turn the adjuster using the box end wrench

provided in the tool kit.

P. 249

The spring preload adjuster has 15 turns.Turn

clockwise to increase spring preload (hard),

or turn counterclockwise to decrease spring

preload (soft).

CRF1100A

The standard position is the 2 turns from the

full soft position.

CRF1100A2/D

The standard position is the 5 turns from the

full soft position.

CRF1100D2

The standard position is the 8 turns from the

full soft position.

NOTICE

Do not turn the adjuster beyond its limits.

Adjust both left and right forks to the same

spring preload.

20190704203539_32MKS6000_eng_BOOK Page 291 Thursday, July 04 2019 20:57:26 JST

Other Adjustments

Adjusting the Front Suspension

Maintenance

286

Adjuster

Summary of Contents for AFRICA TWIN


























































































































































































































































































































































































Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands

Honda AFRICA TWIN, Owner'S Manual

Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands