17
CONTROLS AND FEATURES
CONTROLS
Emergency Stop Switch Clip
and Emergency Stop Switch
The emergency stop switch clip must
be inserted in the emergency stop
switch in order for the engine to start
and run. The emergency stop switch
lanyard must be attached securely to
the operator or to the PFD (Personal
Flotation Device) equipped to an
operator.
When used as described, the
emergency stop switch and
emergency stop switch lanyard
system stops the engine if the
operator falls away from the controls.
A spare emergency stop switch clip is
supplied with the tool kit.
Choke Knob
The choke knob opens and closes the
choke valve in the carburetor.
The ON position enriches the fuel
mixture for starting a cold engine.
The OFF position provides the
correct fuel mixture for operation
after starting, and for restarting a
warm engine.
EMERGENCY STOP
SWITCH LANYARD
EMERGENCY STOP
SWITCH CLIP
EMERGENCY
STOP SWITCH
PUSH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
CHOKE KNOB
OFF
ON
31ZVC6000.book Page 17 Tuesday, June 28, 2016 1:09 PM