67
SERVICING YOUR OUTBOARD MOTOR
Apply Honda Marine Corrosion Inhibitor (or equivalent) to all areas under the engine cover and any exposed metal
surfaces.
Lubrication Points
Apply Honda Marine waterproof grease to the parts
shown below:
Lubrication interval:
20 operating hours or one month after the date of
purchase or the initial use, then every 100 operating
hours or 6 months (refer to the maintenance schedule on
To prevent corrosion, apply anticorrosion oil to pivot
surfaces where grease cannot penetrate.
SHIFT SHAFT
TILLER
HANDLE PIVOT
CLAMP SCREWS
TILT RELEASE
LEVER AND
REVERSE LOCK
ROD
PROPELLER SHAFT
TRANSOM ANGLE
ADJUSTING ROD
SWIVEL CASE
31ZVC6000.book Page 67 Tuesday, June 28, 2016 1:09 PM