144
TROUBLESHOOTING
Emergency Gear Shifting (for DBW type)
If the gear cannot be shifted, perform shift operation manually according to the following procedures and return to port
at possible engine speed.
1. Set the remote control lever in the NEUTRAL position (see page 19-20).
2. Stop the engine (see page 107).
3. Remove the engine cover (see page 57).
4. Shift gear into neutral by inserting the phillips screwdriver with the grip of the tool kit (see page 115) into the hole of
the shift actuator and moving the shaft.
5. Start the engine (see page 67).
6. Shift gear into “F” (Forward) or “R” (Reverse) by moving the shaft of the shift actuator with the phillips screwdriver
with the grip of the tool kit.
After returning to port, stop the engine and anchor the boat.
HOLE
SHIFT
ACTUATOR
GRIP
PHILLIPS
SCREWDRIVER
NEUTRAL
REVERSE
FORWARD
SHAFT
SHIFT
ACTUATOR
NEUTRAL position:
FORWARD position:
REVERSE position:
42ZVL600.book 144 ページ ２０１８年７月１９日 木曜日 午前９時６分
