24
CONTROLS AND FEATURES
The neutral release lever is set on the remote
control lever to prevent an accidental
operation of the remote control lever.
The remote control lever does not
operate unless it is moved while
pulling the neutral release lever up.
This remote control is equipped with
an automotive type engine switch.
On the flush-mount type (D1 type), the
top-mount type (D2 type), the engine
switch locates on the key switch panel.
On the side-mount type (R1 type), the
engine switch locates on your side
near the remote control box.
On the flush-mount type (R2 type) and the
top-mount type (R3 type), the engine switch
locates at the center of the switch panel.
Key positions:
START: to start the engine.
ON:
to run the engine after starting.
OFF:
to stop the engine (IGNITION OFF).
Do not leave the engine switch ON
(key in ON position) when the engine
is not running as the battery will
discharge.
The starter motor will not work
unless the remote control lever is in
the NEUTRAL position, and the clip
is in the emergency stop switch.
Neutral Release Lever
(D1 type)
REMOTE CONTROL LEVER
(R2 type)
REMOTE CONTROL LEVER
NEUTRAL
RELEASE LEVER
NEUTRAL
RELEASE LEVER
(R1 type)
REMOTE
CONTROL
LEVER
NEUTRAL
RELEASE
LEVER
ENGINE
SWITCH
KEY
Engine Switch
(R1 type)
ENGINE SWITCH KEY
(D1, D2 without START/STOP Switch type)
ON
OFF
START
OFF
ON
START
ON
START
OFF
(R2, R3 type)
42ZVL600.book 24 ページ ２０１８年７月１９日 木曜日 午前９時６分
