73
STARTING THE ENGINE
2. Set the control lever in the
NEUTRAL position.
The engine does not start unless the
control lever is set in the
NEUTRAL position.
3. Turn the engine switch key to the
START position and hold it there
until the engine starts.
When the engine starts, release the
key, allowing it to return to the ON
position.
• The starter motor consumes a
large amount of current. Do not
therefore run it continuously for
more than 5 seconds at a time. If
the engine does not start within 5
seconds, wait at least 10 seconds
before running the starter motor
again.
• Do not turn the engine switch key
to the START position while the
engine is running.
NEUTRAL
REMOTE CONTROL LEVER
NEUTRAL
ON START
ENGINE SWITCH KEY
OFF
42ZVL600.book 73 ページ 2018年7月19日 木曜日 午前9時6分