48 |
| 49
VEHICLE CONTROLS
VEHICLE CONTROLS
Rear Seats
Separately raise or lower the left and right 60/40 rear seat backs to make room
for luggage.
n
Fold the Rear Seat Backs
1. Remove the center shoulder belt
from the guide.
Center
Shoulder Belt
Guide
2. Pull the release lever in the trunk
to release the lock.
Release
Lever
3. Fold the seat-back down.
To remove the head restraint:
Pull the
restraint up as far as it will go. Then
push the release button and pull the
restraint up and out.
To reinstall a head restraint:
Insert
the legs back in place, then adjust
the head restraint to an appropriate
height while pressing the release
button. Pull up on the restraint to
make sure it is locked in position.
Rear
For the head restraint system to work properly:
• Do not hang any items on the head restraints or from the restraint legs.
• Do not place any object between an occupant and the seat-back.
• Install each restraint in its proper location.
Improperly positioning head restraints reduces their effectiveness and
increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before
driving.
WARNING
Failure to reinstall or correctly reinstall the head restraints can result in
severe injury during a crash.
Always replace the head restraints before driving.
WARNING