−
If either of the
front windows runs into any obstacle
while it is closing automatically, it
will stop, and then reverse direction.
To close the window, remove the
obstacle, then use the window switch
again.
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
The indicators inside the switches
come on when you turn the ignition
switch to the ON (II) position.
When you push the MAIN switch in,
the switch is off, and the passengers’
windows cannot be raised or lowered.
To cancel this feature, push on the
switch again to get it to pop out.
Keep the MAIN switch pushed in
when you have children in the
vehicle so they do not injure
themselves by operating the
windows unintentionally.
To open or close the driver’s or the
front passenger’s window partially,
push down or pull back on the
window switch lightly and hold it.
The window will stop when you
release the switch.
AUTO REVERSE
Power Windows
Instruments and Controls
209
06/09/13 17:21:02 32SWA600_214
Summary of Contents for Cr-v 2007
