63
THROTTLE OPERATION
Refer to the Safety Precautions on page 44.
Cable Inspection:
1. Check for smooth rotation of the throttle
grip from the fully open to the fully closed
position at both full steering positions.
2. Inspect the condition of the throttle cables
from the throttle grip down to the
carburetor. If the cables are kinked, chafed
or improperly routed, they should be
replaced and/or rerouted.
3. Check the cables for tension or stress at
all steering position. Lubricate the throttle
cables with a commercially available cable
lubricant to prevent premature wear and
corrosion.
(1) Throttle
(2) Throttle cables
(1)
(2)
