Valve Clearance
(cont’d)
Servicing Your Honda
77
1. Coat a new O-rings (1) with engine oil and
install them onto the crankshaft hole cap (2)
and timing hole cap (3).
Apply grease to the crankshaft hole cap and
timing hole cap threads. Install and tighten the
crankshaft hole cap to the specified torque:
11 lbf·ft (15 N·m, 1.5 kgf·m)
Install and tighten the timing hole cap to the
specified torque:
4.4 lbf·ft (6.0 N·m, 0.6 kgf·m)
1. Apply liquid sealant (TB1207B or equivalent)
to the cylinder head semi-circular cut-outs (1)
as shown after cleaning these area.
2. Apply liquid sealant (TB5211B or equivalent)
to the cylinder head cover groove (2) as shown
after degreasing the groove, and install the
cylinder head cover packing (3) into it.
Crankshaft/Timing Hole Cap
Installation
(1) O-rings (new)
(3) timing hole cap
(2) crankshaft hole cap
(1)
(2)
(3)
Cylinder Head Cover Installation
(1) cylinder head semi-circular cut-outs
(1)
(1)
(2) cylinder head cover groove
(3) cylinder head cover packing
(3)
(2)
