66
Servicing Your Honda
Clutch System
4. Apply engine oil to the clutch lifter rod (10)
and insert it into the mainshaft.
5. Install the clutch lifter assembly (11) onto the
rod.
6. Install the clutch pressure plate (12).
7. Install the five clutch springs and bolts (13).
8. Tighten the bolts in a crisscross pattern in two
or three steps to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
9. Apply engine oil to a new O-ring (14) and
install it in the groove of the clutch cover (15).
10. Install the cover by tightening the clutch cover
bolt A (16) and clutch cover bolts B (17) in a
crisscross pattern in two or three steps to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
11. Fill the crankcase with transmission oil
(10) clutch lifter rod
(11) clutch lifter assembly
(12) clutch pressure plate
(13) clutch springs and bolts
(10)
(11)
(12)
(13)
(14) O-ring (new)
(15) clutch cover
(16) clutch cover bolt A
(17) clutch cover bolts B
(15)
(14)
(16)
(17)
