Technical Information
159
Optional Parts List
FRAME
Remarks
Shock spring
Standard
Stiffer
Optional
Softer
Stiffer
Fork spring
Standard
Optional
Softer
The standard fork spring and shock spring
mounted on the motorcycle when it leaves the
factory are not marked. Before replacing the
springs, be sure to mark them so they can be
distinguished from other optional springs.
268.8 lbf/in (4.80 kgf/mm)
No mark
(factory products)
Red
paint
(aftermarket parts)
or
254.8 lbf/in (4.55 kgf/mm)
23.52 lbf/in (0.42 kgf/mm)
22.4 lbf/in (0.40 kgf/mm)
24.64 lbf/in (0.44 kgf/mm)
FRAME
Remarks
Driven sprocket
Standard
< >: Drive chain links
53 Teeth, Aluminum.
<116>
Optional
54 Teeth, Aluminum
<116>
Optional
no offset
52 Teeth, Aluminum
<116>
Handlebar
lower holder
Standard
3 mm offset
TOOLS
Remarks
For checking tire air pressure.
Pin spanner A
Workstand
To adjust spring preload.
(two spanners required)
For maintenance
Air gauge
ENGINE
Remarks
Cooling system
assembly
Orange
Red and Black
280 lbf/in (5.00 kgf/mm)
291.2 lbf/in (5.20 kgf/mm)
White
Blue
These parts and tools may be ordered from your
authorized Honda dealer.
An optional cooling fan is availabe
for competition use.
The fan will help avoid the engine
damage if the engine is kept idling
too long when hot, or when riding
in mud or sand or any condition
that causes high engine load at
low vehicle speed.
2 scribe marks
(aftermarket parts)
3 scribe marks
1 scribe mark and
Bolt
Fan
Nut
Thermo switch
Summary of Contents for CRF250X 2006
