4-4
3. CARBURETOR
a. REMOVAL/INSTALLATION
1) Turn the fuel valve lever to the OFF position, and then
disconnect the fuel tube from the carburetor.
2) Remove the air cleaner (P. 4-2).
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Keep heat, sparks and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
WARNING
[7]
To silencer
chamber
[4] HEAD COVER SHROUD
[2]
PLUG COVER
6 x 12 (2)
[3] 6 mm WASHER (2)
[9]
HARNESS CLIP
[10]
TUBE HOLDER
[6] MOTOR COVER (2)
[13]
CARBURETOR ASSEMBLY
DISASSEMBLY/
REASSEMBLY:
P. 4-6 and 7
[14]
CARBURETOR GASKET
[12]
AIR CLEANER GASKET
Do not reuse.
INSTALLATION:
P. 4-5
[11]
CARBURETOR SPACER
INSTALLATION:
P. 4-5
[16]
INSULATOR GASKET
Do not reuse.
INSTALLATION:
P. 4-5
[15]
CARBURETOR INSULATOR
INSTALLATION:
Install with vent groove
facing toward the carburetor.
INSTALLATION:
When installing the motor
cover, make sure the control
motor harness connector
remains connected securely.
[5] BREATHER TUBE
INSTALLATION:
Before installing the
breather tube check for
deterioration or damage.
Do not reuse.
INSTALLATION:
P. 4-5
[8]
CONTROL MOTOR WIRE
(ENGINE WIRE HARNESS)
INSTALLATION:
P. 4-5
[17] 6 mm SPECIAL BOLT
8.5 N.m (0.9 kgf.m,
6.3 Ibf.ft)
[1]
PLUG COVER BOLT
2.3 N.m (0.2 kgf.m,
1.7 Ibf.ft)
cap.04 EU65is 6500is (Eu).qxd 07.12.17 4:46 PM ページ4-4
