11-1
1. UPPER SHROUD/RIGHT SIDE
SHROUD............................................ 11-1
2. FAN COVER....................................... 11-2
3. COOLING FAN/IGNITION PULSE
GNERATOR ....................................... 11-3
4 GENERATOR ..................................... 11-5
11. FAN COVER/COOLING FAN/
GENERATOR
1. UPPER SHROUD/RIGHT SIDE SHROUD
a. REMOVAL/INSTALLATION
Remove the following parts:
– Fuel tank (P. 7-1)
– Head cover shroud (P. 4-4)
6 x 22 (2)
[5]
RIGHT SIDE
SHROUD
6 x 12 (5)
[2]
INSULATOR
BINDER CLIP (4)
REASSEMBLY:
Install the insulator on the right side
shroud by aligning the cutout with the
convex on the shroud.
[6]
RIGHT SIDE SHROUD INSULATOR
[6]-3 RIGHT SIDE SHROUD
INSULATOR
[6]-1 CUTOUT
[6]-2 CONVEX
Do not touch the insulator with bare hands. The glass wool
of the material sticks in the skin and is dangerous.
[4]
6 mm
SPECIAL BOLT (3)
8.5 N.m (0.9 kgf.m,
6.3 lbf.ft)
[3]
UPPER SHROUD
INSTALLATION:
Insert the flange of the upper
shroud into the groove of the
right side shroud.
[3]-1 FLANGE
[3]-2
GROOVE
[3]-4 UPPER SHROUD
[3]-3 RIGHT SIDE SHROUD
[1] UPPER SHROUD INSULATOR
REASSEMBLY:
Install the insulator on the upper shroud
with the binder clip bent as shown.
[1]-2 BINDER CLIP
[1]-1 UPPER SHROUD INSULATOR
cap.11 EU65is 6500is 07.12.17 5:03 PM ページ11-1
