13
PRE-OPERATION CHECK
4.
Place the tiller on a firm level surface and hold the tiller level (i.e. with
the rotary tines, front wheel (if equipped) and drag bar (see page
)).
Stop the engine before starting service of the tiller. Servicing the tiller
on an unstable surface of the ground or without stopping the engine
can cause injury and/or equipment damage.
Engine operation
Wiring and cables
Control lever function
Tiller outside
Bolts and nuts
1.
2.
3.
4.
5.
14
Daily inspection and service of tiller is essential for safe and reliable
operation. Perform the following check before operation.
If you notice any other abnormal symptoms, consult with your
authorized Honda dealer promptly.
Does the engine stop securely by operating the engine switch? (See
pages
and
for stopping procedure.)
Start the engine. Is there any abnormal sound from the engine? (See
pages
through
for starting procedure.)
Is there any wire or cable pinched by the neighboring parts?
Isn’t the insulation of each wire and cable torn or cut?
Does the lever operate smoothly?
Isn’t there any flammable material (dust, straw, etc.) around the
engine?
Aren’t the fuel and engine oil leaking?
Check for looseness in fastened parts. Securely tighten all loose
parts.
22
24
34
35
11/08/22 16:35:42 32V31610_015