Date of Issue: February, 2005
8-4
© American Honda Motor Co., Inc.
FG110
2. LOWER CRANKCASE
a. DISASSEMBLY/REASSEMBLY
1. Drain the engine oil
2. Remove the air cleaner case assembly
.
3. Remove the carburetor
.
4. Remove the recoil starter and fuel tank
5. Remove the muffler
.
6. Remove the recoil starter pulley
.
7. Remove the flywheel
OIL OUTLET VALVE PLATE
INSTALLATION:
Install the valve aligning
the chamfer and
projections.
CHAMFER
PROJECTIONS
12.3 x 2.4 mm O-RING
5 x 16 mm SOCKET BOLT (3)
SHROUD
REASSEMBLY:
Clean the socket bolt threads
and apply liquid sealant
(Loctite® 648) to the threads.
4 x 8 mm SCREWS (2)
REASSEMBLY:
Clean the threads and apply
liquid sealant (Loctite® 201)
to the threads.
3.0 N•m (0.3 kgf•m, 2.2 lbf•ft)
OIL TUBE
D13.0 TUBE CLIP (2)
3 x 5 mm SCREW
5 x 30 mm SOCKET BOLTS (4)
6.4 N•m (0.7 kgf•m, 5.1 lbf•ft)
5 x 20 mm SOCKET BOLTS (2)
6.4 N•m (0.7 kgf•m, 5.1 lbf•ft)
LOWER CRANKCASE
OIL FILLER CAP GASKET
OIL FILLER CAP
STOPPER PLATE
OIL OUTLET VALVE
Summary of Contents for FG110
Page 3: ...Date of Issue February 2005 American Honda Motor Co Inc...
Page 7: ...Date of Issue February 2005 1 4 American Honda Motor Co Inc FG110 NOTES...
Page 35: ...Date of Issue February 2005 4 6 American Honda Motor Co Inc FG110 NOTES...
Page 79: ...Date of Issue February 2005 11 4 American Honda Motor Co Inc FG110...
