Basic Operation & Riding
96
Riding in Reverse
If you need to ride in reverse, make sure the area behind you is clear
and only operate the ATV at low speed.
1. Bring the vehicle to a complete stop, then make sure the
transmission is in neutral.
2. Be sure there are no obstacles or people in the way.
3. Fully rotate the P/R lever (1) counterclockwise to engage the P/R
lever with the reverse assist lever (2).
4. While continuing to hold the P/R lever, squeeze the rear brake
lever/parking brake lever (3), then press the downshift switch ( )
(4) once to shift into “R” (reverse) gear.
5. Make sure that the reverse indicator comes on and the gear
position indicator shows “R”.
WARNING
3
WARNING
Improperly operating in reverse could cause
you to hit an obstacle or person behind you,
resulting in serious injury.
Make sure there are no obstacles or people
behind you before selecting reverse gear.
When it is safe to proceed, go slowly.
LEFT HANDLEBAR
(1)
(1) P/R lever
(3)
(2) reverse assist lever
(3) rear brake lever/
parking brake lever
(2)
(4)
(5)
(4) downshift switch
(5) upshift switch
19 TRX500FA5 FA6-FA7 31HR6640.book Page 96 Friday, May 4, 2018 10:57 AM
Summary of Contents for FourTrax Foreman Rubicon TRX500FA5 2019
Page 10: ...19 TRX500FA5 FA6 FA7 31HR6640 book Page 9 Friday May 4 2018 10 57 AM ...
Page 68: ...Instruments Controls 58 19 TRX500FA5 FA6 FA7 31HR6640 book Page 58 Friday May 4 2018 10 57 AM ...
Page 84: ...Before Riding 74 19 TRX500FA5 FA6 FA7 31HR6640 book Page 74 Friday May 4 2018 10 57 AM ...
Page 291: ...PRINTED IN USA WPCXXXX 2018 XX 19 00X31 HR6 6400 31HR6640 ...