background image

Servicing Your Honda

139

Engine Oil & Filter

5. Reinstall the oil filter cover, making sure the bolts are tightened 

to the specified torque:

7 lbf·ft (10 N·m, 1.0 kgf·m)

6. Pour the drained oil into a suitable container and dispose of it in 

an approved manner (page 212).

NOTICE

Improper disposal of drained fluids is harmful to the environment.

7. Install the tank cover assembly and seat.

Add Engine Oil:

1. Reinstall the oil drain bolt with the new sealing washer and 

tighten it to the specified torque:

18 lbf·ft (25 N·m, 2.5 kgf·m)

2. Fill the crankcase with the recommended grade oil 

approximately:

3.2 US qt (3.0 ℓ)

3. Reinstall the oil fill cap/dipstick.
4. Start the engine and let it idle for 3 – 5 minutes.
5. Stop the engine, wait 2 – 3 minutes and check the oil level. Make 

sure the oil is between the upper and lower level marks on the oil 
fill cap/dipstick. If necessary, add more oil but do not overfill.

6. Check that there are no oil leaks.
7. Install the oil check/fill door.

If a torque wrench is not used for installation, see your dealer as 
soon as possible to verify proper assembly.

19 TRX500FE2_31HR4850.book  Page 139  Wednesday, April 4, 2018  11:48 AM

Summary of Contents for FourTrax Foreman TRX500FE2 2019
































































































































































































































































































Reviews: