180
Ma
in
te
na
nce
Side Stand
Checking the Side Stand
1.
Check that the side stand operates
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and
lubricate the pivot bolt with clean
grease.
2.
Check the spring for damage or loss of
tension.
3.
Sit on the vehicle, shift the transmission
to Neutral, and raise the side stand.
Sit on the vehicle and raise the side
stand.
4.
Start the engine, pull the clutch lever in,
and shift the transmission into gear.
Start the engine and press the D side of
N-D switch to switch the transmission
into AT MODE (D).
5.
Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn’t stop, have
your vehicle inspected by your dealer.
Side stand spring
GL1800/B
GL1800BD/DA
GL1800/B
GL1800BD/DA
20 GL1800 32MKC820.book 180 ページ 2019年9月20日 金曜日 午後3時9分
Summary of Contents for GL1800 2020
