1-3
GX120K1•GX160K1•GX200
SPECIFICATIONS
*1: NIPPONDENSO CO., LTD.
*2: With centrifugal clutch
*3: The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600 rpm (Net power) and at 2,500 rpm (Max. net torque). Mass
production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending
on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and
other variables.
Model
GX200
Type
4-stroke, overhead valve, single cylinder, inclined by 25°
Total displacement
196 cm
3
(12.0 cu in)
Bore and stroke
68 x 45 mm (2.7 x 2.1 in)
Net power
*3
4.1 kW (5.5 HP)/3,600 min-1(rpm)
Maximum net torque
*3
12.4 N•m (9.1 ft•lb)/2,500 min-1(rpm)
Compression ratio
8.5: 1
Fuel consumption
1.7 L/h (0.45 gal) /3,600 min-1 (rpm)
Cooling system
Forced-air
Ignition system
Transistorized magneto ignition
Ignition timing
20° B.T.D.C. (Fixed)
Spark plug
BPR6ES (NGK), W20EPR-U (DENSO
*1
)
Carburetor
Horizontal type, butterfly valve
Air cleaner
Dual element type
Semi-dry type
Oil bath type
Cyclone type
Governor
Centrifugal mechanical governor
Lubricating system
Splash
Engine oil capacity
0.6 L (20.2 oz.)
Starting system
Recoil or electric starter
Stopping system
Ignition primary circuit ground
Fuel used
Regular gasoline (86 pump octane: unleaded preferred)
Fuel tank capacity
3.1 L/h (0.82 US gal)
Reduction oil
capacity
1/2 reduction
*2
0.5 L (17 oz.)
1/2 reduction
Lubricated from engine crankcase
1/6 reduction
0.15 L (5 oz.)
Clutch type
1/2 reduction
Wet, multi-plate, centrifugal
Clutch engagement
1/2 reduction
1,800 rpm
P.T.O. shaft rotation
Counterclockwise (from P.T.O. side)
gx120k1_gx160k1_gx200
Summary of Contents for GX120K1
