From serial n° 8700564 to 8800000:
1. The spline forms a direct part of the wheel’s hub and is no
longer a separate component.
NOTE:
T he se whee ls with integral spline (Tool n°
CG82000591H1) are interchangeable with the type previously
used and make it easier to remove the wheel.
From serial n° 8800001:
1. The rear wheel is no longer fixed by the screw [4] and
nut
[5] , but is the same as the front wheel using a snap
ring
[1] and a shoulder washer [2].
Tightening torque
[5]
Rear wheel nut
20 ÷ 25 Nm
Tyre pressures
Front
1.5 Bar
Rear
1.2 Bar
86
