1
SPECIFICATIONS
1.1
General specifications
MODEL
UNIT
HF2213
HF2218
S
H
S
H
FRAME
Electric system
V
12
Battery
Ah
18
Gearbox (Peerless)
700-057
705-002
700-057
705-002
Differential (Peerless)
100-128
Front tyres
13 x 5.00 - 6
Rear tyres
18 x 8.50 - 8
Front tyres pressure
bar
1.5
Rear types pressure
bar
1.2
Weight
kg
213
228
Speed
on 1.st
km/h
2.2
2.3
on 2.nd
km/h
3.3
3.6
on 3.rd
km/h
5
5.4
on 4.th
km/h
6.4
7
on 5.th
km/h
7.6
8.3
Inside turning circle
left inside
m
1.3
1.1
Cutting height
cm
3 ¸ 9
Cutting width
cm
102
122
Grass-catcher capacity
l
300
Garanteed sound power
dB
(A)
100
105
Sound pressure level at the ear :
measured in compliance with
81/1051/EEC
dB
(A)
87
90
Real measured value of
acceleration on seat
Value measurement has been
performed with rated rpm with
operator sitted and on a
smooth-uniform cement surface EN
1031/02.93
m/s
2
1.5
2.6
ENGINE
Model
GXV390 DCA
GXV610 QAF4
Type
4 Stroke, overhead valve, single cylinder
4 Stroke, overhead valve, 90° V-Twin
Displacement
cm
3
389 (23.7 cu in)
614 (37.7 cu in)
Bore and stroke
mm
88 x 64 (3.46 x 2.52 in)
77 x 66 (3.0 x 2.6 in)
Max. horsepower
kW
9.7 (13HP) /3.600 rpm
13.4 (18HP) /3.600 rpm
Max. torque
N.m
27.5 (2.8 kg-m, 20.3 ft-Ib) /2.500 rpm
43.1 (4.39 kg-m, 31.7 ft-Ib) /2.500 rpm
Compression ratio
7.7 : 1
8.3 : 1
Fuel consumption
g/kWh
313 (230 g/HPh, 0.51 Ib/HPh)
Cooling system
Forced air
Ignition system
Transistorized magneto
Ignition timing
20 ± 2° B.T.D.C.
Spark plug
BPR5ES (NGK), W16EPR-U (NIPPONDENSO)
Carburetor
Horizontal type, butterfly valve
Air cleaner
Dual element
Governor
Centrifugal mechanical governor
Lubrication system
Pressure and splash
Oil capacity
l
1.1 (1.16 US qt, 0.97 Imp qt)
1.8 (1.90 US qt, 1.58 Imp qt)
Starting system
Electric starter
Stopping system
Primary circuit ground
Fuel tank capacity
l
2.3 (0.61 US gal, 0.51 Imp gal)
Fuel used
Unleaded regular gasoline (86 pump octane)
PTO after rotation
Counterclocwise (from PTO side)
NOTE:
Specifications are subjet to change without notice.
6
