3 EN
10 = Warning:
Read the instructions before operating this machine.
11 = Warning:
The engine emits toxic carbon monoxide. Do not
run in an enclosed area.
12 = Warning!
Petrol is highly flammable.Stop the engine before re-
fueling.
13 = Warning:
the muffler becomes very hot
during operation and remains hot for a
while after stopping the engine.
14 = This is a recyclable product.
It contains
lead. Do not discard it in the environment
and dispose of in compliance with the laws
in force.
1.2 SAFETY DECALS
Your machine must be used with care.Therefore, decals have been
placed on the machine, to remind you pictorially of the main precau-
tions to take during use.These decals are to be considered an inte-
gral part of the machine.
If a decal should fall off or become illegible, contact your Dealer to re-
place it.Their meaning is explained below.
1 = Warning:
Read the instructions before operating this machine.
2 = Warning:
Disconnect the ignition key and read the instruc-
tions before carrying out any repair or maintenance work.
3 = Danger! Ejected objects:
Do not operate without either the
stone-guard or grass-catcher in place.
4 = Danger! Ejected objects:
Keep bystanders away.
5 = Danger! Machine rollover:
Do not use this machine on slopes
greater then 10°.
6 = Danger! Dismemberment:
Make sure that children stay clear
of the machine all the time when engine is running.
7 = Danger of cutting yourself.
Blades in movement. Do not put
hands or feet near or under the opening of the cutting plate.
8 = Warning:
Do not manipulate the microswitch.
9 = Avoid injury from getting caught in belt:
Do not operate the
machine without shields in place. Stay clear of belts.
15 = Flammable vapours
- Keep away from open flames.
16 =
Wear protective goggles.
17 =
Keep out of the reach of children.
18 = Corrosive liquid.
If the liquid comes into contact with the
eyes, rinse immediately with water and call a physician
19 =
Read the instructions for use.
20 =
Explosion risk.
10
12
15
16
17
18
19
20
11
13
14
1
3
5
2
4
6
7
8
9
2. IDENTIFICATION OF THE MACHINE
AND COMPONENTS
2.1 IDENTIFICATION OF THE MACHINE
The plate located on the
left side of the main frame
has the essential data of
each machine.
The serial number (5) must
be quoted when you re-
quire technical assistance
or spare parts.
1.
Acoustic power level according to
directives 2000/14/EC, 2005/88/EC
2.
Conformity mark according to directives
2006/42/EC, 2005/88/EC, 2004/108/EC
3.
Year of manufacture
4.
Type of machine
5.
Serial number
6.
Weight in kg
7.
Name and address of Manufacturer
8.
Engine nominal power (at 2800 rpm).
1
8
6
7
4
5 2
3
1.3 REGULATIONS FOR TOWING
A kit for towing a small trailer is available on
request.This accessory is to be fitted as per
the instructions provided.
When using, do not exceed the recom-
mended drawbar loads stated on the decal
and follow the safety instructions,
( 1.2, C-6).
Total towing weight: On level ground: 200 kg or less
On sloping ground (10°or less): 100 kg or less
