HPD L15A7 Engine Kit Assembly Manual
9
8/2012
Prepare The L15A7 Honda Engine For The Engine Kit Installation
Remove the V-TEC pressure sensor.
Save the O-ring for reuse in the HPD
engine kit.
Remove the harmonic balancer. If not
using an impact wrench, use a
crankshaft pulley holder.
Remove the oil pan. The gasket
sealant used during assembly is quite
strong, so oil pan removal will be
challenging. Alternate mallet strikes to
sides of the oil pan near bottom front
and rear until the tone changes then
use prying tabs to lift pan from engine
block surface.
NOTE: Do not pry against the
sealing surface.
Harmonic
Balancer
V-TEC Pressure Sensor
Prying Tab
Summary of Contents for HPD L15A7
Page 1: ......