4. PRE-OPERATION CHECKS
16
E
OXYGENATED FUELS
Some conventional gasolines are being blended with alcohol or an ether
compound. These gasolines are collectively referred to as oxygenated fuels.
To meet clean air standards, some areas use oxygenated fuels to help reduce
emissions.
If you use an oxygenated fuel, be sure it is unleaded and meets the minimum
octane rating requirement.
Before using an oxygenated fuel, try to confirm the fuel's contents. Some
areas require this information to be posted on the pump.
The following are the approved percentages of oxygenates:
If you notice any undesirable operating symptoms, try another service station,
or switch to another brand of gasoline.
Fuel system damage or performance problems resulting from the use of an
oxygenated fuel containing more than the percentages of oxygenates
mentioned above are not covered under warranty.
ETHANOL – – – – – – (ethyl or grain alcohol) 10% by volume
You may use gasoline containing up to 10% ethanol
by volume. Gasoline containing ethanol may be
marketed under the name “Gasohol”.
MTBE – – – – – – – – (Methyl Tertiary Butyl Ether) 15% by volume
You may use gasoline containing up to 15% MTBE by
volume.
METHANOL – – – – – (methyl or wood alcohol) 5% by volume
You may use gasoline containing up to 5% methanol
by volume, as long as it also contains cosolvents and
corrosion inhibitors to protect the fuel system.
Gasoline containing more than 5% methanol by
volume may cause starting and/or performance
problems. It may also damage metal, rubber, and
plastic parts of your fuel system.
