51
Engine Oil Recommendations
OIL FILLER CAP/DIPSTICK
AMBIENT TEMPERATURE
UPPER LIMIT
LOWER LIMIT
After changing the engine oil, and before starting the engine, check
the oil level with the mower on a level surface:
Wipe the dipstick clean.
Insert and remove the dipstick without screwing it into the filler
neck. Check the oil level shown on the dipstick.
If the oil level is low, add oil to reach the upper limit mark on the
dipstick. Do not overfill. If the engine is overfilled, the excess oil
may get transferred to the air cleaner housing and air cleaner.
Running the engine with a low
oil level can cause engine
damage.
Screw in the oil filler cap/
dipstick securely.
SAE 10W-30 is recommended for
general use. Other viscosities
shown in the chart may be used
when the average temperature in
your area is within the indicated
range.
Use 4-stroke motor oil that meets or
exceeds the requirements for API
service classification SE or later (or
equivalent). Always check the API
service label on the oil container to
be sure it includes the letters SE or
later (or equivalent).
Oil is a major factor affecting
performance and service life.
5.
a.
b.
c.
d.
12/02/01 15:38:13 42VK3810_051
