18
Follow the Maintenance Schedule on
. Remember that this
schedule is based on the assumption that your Honda engine product
will be used for its designed purpose. Sustained high-load or
high-temperature operation, or use in dusty conditions, will require
more frequent service.
Air Index
(Models certified for sale in California)
An Air Index Information label is applied to engines certified to an
emission durability time period in accordance with the requirements of
the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating to the engine’s emission durability period. The descriptive
term indicates the useful life period for the engine’s emission control
system. See your
EMISSION SYSTEM WARRANTY
(
) for
additional information.
Specifications
Mower Features
Dimensions and Weights
Engine Design and Performance
Transmission Design and Performance
Maintenance
Descriptive Term
Applicable to Emissions
Durability Period
Moderate
50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
Intermediate
125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
Extended
300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
HRX217K6VKAA
HRX217K6VKPA
Honda rotary mower, 21-inch mower deck,
Clip Director, Select Drive variable speed
transmission, Auto Choke System
Length
63.4 in (1,610 mm)
Width
23.1 in (588 mm)
Overall height *
42.2 in (1,073 mm)
Dry mass**
89.1 lb (40.4 kg)
Cutting width
20.9 in (530 mm)
Cutting heights (7)
3/4 ~ 4 in (19 ~ 101 mm)
* 1-1/4 inch (32 mm) cutting height and handle in highest position
** Includes the grass bag
Model
GCV200
Type
4-stroke, single-cylinder, air-cooled
Displacement
12.3 cu in (201 cc)
Bore and stroke
2.60 x 2.32 in (66.0 x 59.0 mm)
Compression ratio
8.0:1
Ignition system
Transistorized magneto
Transmission type
Variable speed
Ground speed
0 ~ 4.0 mph
(0 ~ 1.78 m/s)
Fuel
Unleaded gasoline with a pump
octane rating of 86 or higher containing
no more than 10% ethanol by volume
Capacity: 0.24 US gal (0.91 L)
Blade Bolt
Torque
36 ~ 43 ft-lb (49 ~ 59 N•m)
Engine Oil
SAE 10W-30, API SJ or later
Capacity: 13.5 oz (0.40 L)
Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.40 L)*
Spark Plug
Type: NGK - BPR5ES
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
Select Drive
Cable
Adjust for proper operation.
Maximum
Governed
Speed
2,950 ~ 3,100 rpm **
Shop
manual
Valve
clearance
(cold)
Intake: 0.10 ± 0.02 mm
Exhaust: 0.10 ± 0.02 mm
Shop
manual
* Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level (
).
**Do not try to increase the engine speed above the maximum
governed speed; the blades could fracture and come apart.
