17-8
4) Move the remove control lever fully to the “R” (Reverse)
position, then return it slowly to the “N” (Neutral) position.
5) With the remote control lever in the position described in
step 4, mark (B) at the end of the cable outer seal of the
inner cable.
6) Mark (C) at the midpoint between the mark (A) and the
mark (B).
7) Align the mark (C), marked in step 6, with the end of the
cable outer seal.
8) Move the shift link pin end lightly right and left. If the shift
link pin has a free play, set the shift link pin at the center of
the free play.
[2] “N” (NEUTRAL)
[1]
“R” (REVERSE)
[3]
MARK (B)
[2]
MARK (A)
[1]
MARK (B)
[3]
MARK (C)
[1]
MARK (C)
[1]
SHIFT LINK
PIN
