English |
5
take sufficient precaution to keep
balance at all times particularly
on slopes and wet grass . Do
not stretch yourself too much
forwards . Do not operate the
mower in a rush .
f
The user is responsible for
accidents or hazards occurring to
other people or their property .
f
If any hazard occurs whilst the
machine is operating immediately
press the red STOP button .
f
Ensure correct installation of the
perimeter wire as instructed in
the installation guide .
For complete instructions on
the Miimo installation, please
refer to the Installation Guide
provided with the product .
f
Periodically inspect the area
where the mower is used and
remove all stones, sticks, wires
and other foreign objects .
f
Do not run any live mains cables
in the working area . If a mains
cable becomes entangled in the
robotic mower it must be isolated
before any attempt to remove it .
f
Periodically inspect to see that
the blades, blade bolts and
cutter assembly are not worn
or damaged . Replace worn or
damaged blades and bolts in sets
to preserve balance .
f
Never operate the machine with
defective guards or without
safety devices .
f
Do not put hands or feet near or
under rotating parts .
f
Never pick up or carry the machine
while the motor is running .
f
Do not leave the machine to
operate unattended if you know
that there are pets, children or
people in the immediate vicinity .
f
Start the machine according to
the instructions standing well
away from rotating parts .
f
Do not use the product at the
same time as a sprinkler or
use the schedule to ensure
that the two systems never run
simultaneously .
f
If for any reason the product is
submerged, take it away from
water and turn it off using the
On/Off switch . Do not attempt to
switch the product on but contact
your Honda authorised dealer .
f
Do not modify this product.
Unauthorized modifications may
impair the safety of your product
and may result in increased noise
and vibration .
Turn off the product using the On/Off
switch:
– before clearing a blockage,
– before checking, cleaning or
working on the machine,
– before storage,
– if the machine vibrates abnormally
(stop and check immediately),
– after striking a foreign object,
inspect the machine for damage
and get advice on necessary
repairs from your Honda
authorised dealer .
Summary of Contents for Miimo HRM40
