Engine Oil
u
Changing Engine Oil & Filter
95
continued
Mainten
a
nce
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
1.
Remove the lower cowl.
2
P. 90
2.
If the engine is cold, idle the engine for 3
to 5 minutes.
3.
Turn the ignition switch off and wait for
2 to 3 minutes.
4.
Place on a firm, level surface and lower
the side stand.
5.
Place a drain pan under the drain bolt.
6.
Remove the oil fill cap/dipstick, drain
bolt, and sealing washer to drain the oil.
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u
Discard the oil and oil filter at an
approved recycling centre.
NOTICE
Using the wrong oil filter can result in serious damage to
the engine.
Sealing washer
Drain bolt
16 NC750XA XD-42MKA8000.book 95 ページ 2015年9月16日 水曜日 午後12時39分
Summary of Contents for NC750XA
Page 1: ......
Page 53: ...49 Operation Guide 16 NC750XA XD 42MKA8000 book 49 ページ 2015年9月16日 水曜日 午後12時39分 ...
Page 166: ...1 1 ...