PUSH
PUSH
Example:
●
To input “0”, wait for 5 seconds without
pushing the ignition switch when the
Honda SMART Key indicator comes on.
●
To input “1”, push the ignition switch once
within 5 seconds when the Honda SMART
Key indicator comes on.
ID number input success
After the last ID number is inputted, the
Honda SMART Key indicator will go off and
come on again.
The ignition switch is then unlocked. Turn the
ignition switch to the (On) position within
6 minutes. You can start the engine.
To lock the ignition switch, turn the ignition
switch to the SEAT, (Off), or (Lock)
position, and push and hold the ignition
switch for about 2 seconds. All turn signals
flash once.
The ignition switch also locks automatically
when the ignition switch has been in the
SEAT, (Off), or (Lock) position for about
6 minutes after the ID number is successfully
inputted.
When the ignition switch is locked, the
Honda SMART Key indicator goes off.
To unlock the ignition switch again, repeat the
procedure for unlocking the ignition switch.
20201028145327_32K2CA000_eng_BOOK Page 106 Wednesday, October 28 2020 15:00:25 JST
Unlock the Ignition Switch in an Emergency
Troubleshooting
103
Continued
To input “0”
To input “1”
Push one time
No push
Ignition switch
Ignition switch
