The recommended brake fluid is Honda
DOT 3 or DOT 4 brake fluid from a sealed
container, or an equivalent.
Other Checks:
Make sure there are no fluid leaks. Check
for deterioration or cracks in the hoses and
fittings.
Front Brake Fluid Level:
With the scooter in an upright position,
check the fluid level. It should be above the
LOWER level mark ( ). If the level is at or
below the LOWER level mark, check the
brake pads for wear (page
).
Worn pads should be replaced. If the pads
are not worn, have your brake system
inspected for leaks.
This scooter has a hydraulic front disc
brake.
As the brake pads wear, brake fluid level
drops.
There are no adjustments to perform, but
fluid level and pad wear must be inspected
periodically. The system must be inspected
frequently to ensure there are no fluid leaks.
If the control lever free travel becomes
excessive and the brake pads are not worn
beyond the recommended limit (page
),
there is probably air in the brake system
and it must be bled. See your Honda dealer
for this service.
(1)
1
109
109
(1) LOWER level mark
Front Brake
28
10/02/17 16:53:37 32KWN600_038
http://mototh.com
Summary of Contents for PCX150i
Page 1: ...150i http mototh com ...
Page 142: ...http mototh com ...
Page 143: ...58 X 57 9 mm 10 6 1 153 cm3 http mototh com ...
