background image

VEHICLE CONTROLS

n

Unlocking/Locking the Doors & Trunk

To unlock:

 Grab the driver’s door

handle when the vehicle is off to

unlock the driver’s door and fuel

fill door. Grab the front passenger’s

door handle to unlock all doors.

To lock:

 Touch the door lock sensor 

on the front door when the vehicle 

is off. If the smart entry remote is 

inside the vehicle, the doors will not 

lock.

Door lock sensor

n

Unlocking the Trunk

Press the trunk release button to

unlock and open the trunk.

Trunk release 

button

Smart Entry System

When you carry the smart entry remote, you can lock/unlock the doors, fuel fill 

door and open the trunk. You can lock/unlock the doors and fuel fill door within 

a radius of about 32 inches (80 cm) of the outside door handle. You can open the 

trunk within about 32 inches (80 cm) radius from the trunk release button.

You can customize door locking and unlocking settings.

Summary of Contents for Smart Entry Remote

Page 1: ...g the doors Press the lock button once to lock all doors Press twice to hear audible verification for setting the security alarm Unlocking the doors Press once to unlock the driver s door and fuel fill door Press twice to unlock remaining doors Unlocking the trunk Press the trunk release button for approximately one second to unlock and open the trunk To engage panic mode Press the panic button on...

Page 2: ... the vehicle the doors will not lock Door lock sensor n Unlocking the Trunk Press the trunk release button to unlock and open the trunk Trunk release button Smart Entry System When you carry the smart entry remote you can lock unlock the doors fuel fill door and open the trunk You can lock unlock the doors and fuel fill door within a radius of about 32 inches 80 cm of the outside door handle You c...

Page 3: ...e Listen for a beep The system is activated 2 Walk at least 5 feet 1 5 m away 3 Listen for a beep and look for the lights to flash The doors lock 5 feet 5 feet Models with Color Audio To turn on this feature follow these steps with vehicle stopped and the power mode set to ON 1 Press the MENU CLOCK button then select Settings 2 Select Vehicle 3 Select Door Window Setup 4 Select Walk Away Auto Lock...

Page 4: ...nformation interface and the POWER button flashes the READY indicator does not come on Turn on the power system as follows 1 Touch the center of the POWER button with the H logo on the smart entry remote while the POWER button is flashing The buttons on the smart entry remote should be facing you 2 Press the brake pedal and press the POWER button within 10 seconds after the beeper sounds and the P...

Reviews: