−
−
18 lbf·ft (25 N·m , 2.5 kgf·m)
1.7 US qt (1.6 )
95
Servicing Your Honda
Engine Oil
Improper disposal of drained f luids is harmf ul to the environment.
Add Engine Oil:
Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
).
Check that the drain plug sealing washer is in good condition. If
necessary, replace the sealing washer.
Reinstall the oil drain plug and tighten it to the specified torque:
Fill the crankcase with the recommended grade oil approximately:
Reinstall the oil filler cap/dipstick.
Start the engine and let it idle for 3
5 minutes.
Check that there are no oil leaks.
If a torque wrench is not used for installation, see your Honda dealer as
soon as possible to verify proper assembly.
Reinstall the oil filler cap/dipstick.
Stop the engine, wait 2
3 minutes and check the oil level. Make sure
the oil is between the upper and lower level marks on the oil filler
cap/dipstick. If necessary, add more oil but do not overfill.
1.
2.
3.
4.
5.
6.
7.
3.
154
8.
08/08/07 20:09:07 31HN6680 0104
Summary of Contents for SPORTRAX 250X 2009
