46
Installation:
Use a genuine Honda replacement blade or equivalent.
A bent blade can be the cause of serious personal injury or accident.
The blade bolts are specially designed for this application and must
not be replaced with any other bolts.
Blade bolt torque:
BLADE
OUTSIDE
TORQUE WRENCH
BLADE ROTATING DIRECTION
Clean dirt and grass from the blade, blade holder, and the inside of
the mower deck.
Install the blade as described below.
After installing the blade, check that it does not interfere with the
housing. If the blade contacts the housing, consult your authorized
Honda mower dealer.
Hold the end of the blade by hand, tighten the blade bolts to the
specified torque.
54 N·m (5.5 kgf·m , 40 lbf·ft)
(There should be no clearance between the blade and blade
holder at the
points indicated by arrows)
1.
2.
3.
(1)
4.
05/10/11 18:21:06 3CVD8620_050