56
BLADE
BLADE BOLTS
STARTER GRIP
Change the engine oil (see page
).
If the weed mower will be stored for longer than 3 months, remove the
spark plug and pour three tablespoons (approximately 1 oz.) of clean
motor oil into the cylinder. Pull the recoil starter rope gently to
distribute the oil, and then reinstall the spark plug.
Clean the air cleaner (see page
).
Clean the cutting blades and the various other parts of the weed
mower, then check nuts and bolts, etc., for tightness. Coat the
cutting blade with engine oil.
If the paint has come off the inside of the blade cover, remove rust
from such portions, and apply a coating of rust prevention.
Pull the starter grip until resistance is felt.
Place a cover over the weed mower or store it in a well-ventilated
location with a roof.
2.
3.
4.
5.
42
44
6.
7.
05/10/11 18:23:16 3CVD8620_060