20
PRE-OPERATION CHECKS
5.
Perform a pre-operation inspection on a firm, level surface with the
engine stopped and spark plug cap removed from the spark plug.
Running the engine with low oil level will cause serious engine
damage.
Check the engine oil level
Recommended oil
Using nondetergent oil or 2-stroke engine oil could shorten the
engine’s service life.
ENGINE OIL CAPACITY:
1.
OIL FILLER CAP
UPPER OIL
LEVEL
AMBIENT TEMPERATURE
For safe and efficient mowing, always make a pre-operation inspection
before operating:
Check the oil level shown on the dipstick. If near the lower level, fill
to the upper level with the recommended oil.
Insert the dipstick into the oil filler neck, but do not screw it in.
Remove the oil filler cap and wipe the dipstick clean.
Place the weed mower on a level surface.
Use 4-stroke motor oil that meets or exceeds the requirements for API
service classification SE or later (or equivalent). Always check the API
service label on the oil container to be sure it includes the letters SE or
later (or equivalent).
SAE 10W-30 is recommended for general use. Other viscosities shown
in the chart may be used when the average temperature in your area is
within the indicated range.
0.65
(0.69 US qt , 0.57 Imp qt)
a.
b.
c.
d.
07/05/31 15:50:39 3CVD8620_024