3 EN
SAFETY STICKERS
Your grass trimmer must be used with care.
For this reason, adhesive labels in the form of pictograms have
been placed on the machine to remind you of the main operating
precautions. Their meanings are specified below. These labels are
considered to be an integral part of the machine. If any of them
comes off or becomes difficult to read, please contact your dealer to
replace it. We also recommend that you should carefully read all the
safety instructions (
see page 2
).
IDENTIFICATION OF MACHINE
GENERAL DESCRIPTION
IDENTIFICATION OF COMPONENTS
CONTENTS OF BAG
[1]
WARNING:
Read the owner's manual before using the machine.
[2]
WARNING:
Projection hazard. Ensure that all people and animals
stay at a minimum distance of 15 m when you operate the machine.
[3]
Always wear goggles, a hard hat and any other necessary protective
accessories to protect your eyes and body from objects (such as
gravel, glass or pieces of metal) thrown up by the cutting attachment.
[4]
The grass trimmer is to be used with a nylon line cutting attachment
only. Do not use a circular saw blade or a metal disc.
[5]
Cutting attachment rotation speed.
[6]
The engine emits toxic carbon monoxide. Do not run in an enclosed
area.
[7]
Petrol is highly flammable. Stop the engine before refueling.
[8]
Acoustic power level according to the directives 2000/14/EC,
2005/88/EC
[9]
Conformity mark according to directives 98/37/EC, 2000/14/EC,
2004/108/EC, 2005/88/EC, 2006/42/EC
[10]
Model - Type
[11]
Model - Name
[12]
Year of manufacture
[13]
Serial number
[14]
Russian conformity mark
[15]
Name and address of manufacturer
[5]
[4]
Cutting attachment
Rotating speed
-1
General instructions
[1]
[2]
[3]
[1]
[6]
[7]
[A] Identification plate
[12]
[15]
[14]
[10] [11]
[13]
[8]
dB
-----
WA
L
Rue des Châtaigniers - Pôle 45
45140 Ormes - France
[9]
[16]
Engine
[24]
Throttle control trigger
[17]
Spark plug
[25]
Start / Stop switch
[18]
Recoil starter
[26]
Transmission shaft
[19]
Air filter
[27]
Cutting attachment guard
[20]
Fuel tank
[28]
Nylon line cutting head
[21]
Throttle cable
[29]
Bike handle
[22]
Clutch housing
[30]
Line cutter blade
[23]
Control grip
[31]
Spark plug wrench/Torx wrench
[32]
Hexagonal wrench
[33]
Goggles
[34]
Guard, screw and nut
[35]
Handle, screw and nut
[19]
[27]
[28]
[A]
[26]
[22]
[23]
[20]
[16]
[21]
[29]
[24]
[25]
[18]
[17]
[30]
[31]
[32]
[33]
[34]
[35]
Summary of Contents for UMS425E1
Page 64: ...RCS ORL ANS B 501 736 565...
