![background image](http://html1.mh-extra.com/html/honey-bee/airflex-sdx-225/airflex-sdx-225_operators-manual_2158387061.webp)
Honey Bee Manufacturing Ltd.
SDX Header
Page 61
combine’s operator manual for details.
Before attempting to adjust the reel height using
the combine controls, ensure the reel height
option is selected via the Automatix Lite control
panel.
Header Tilt/Reel Height Switch
Fig. 81 - Activate Reel Height mode
For details on setting the minimum reel height,
.
It is important that a reel clearance of 1 1/2”
from the cutter bar has been set with the header
in rigid mode prior to attempting to operate the
hydraulic reel height and fore/aft controls, or the
reel fingers may become damaged.
16.3.3 - Reel Speed
The reel speed is controlled and viewed via the
combine’s control panel and display. Please see
your combine’s user manual for details.
The reel speed sensor outputs 48 pulses per
rotation (PPR). You may have to calibrate your
combine to match this value in order to get
accurate readings, see section
98 for details.
Set reel speed slightly faster than ground speed.
When traveling over 2 mph
(3.2 kph), the
reel should move ~10% faster than ground
speed.
When traveling under 2 mph
(3.2 kph), the
reel should move ~20% faster than ground
speed.
16.4 - Knife, Feed Auger Drum and
Draper Speed.
On the header, the knife, feed auger drum and
draper speeds are directly linked to the combine
feeder house pto speed .
16.5 - Crop Dividers
The crop dividers are locked in place by default from
the factory.
There are two possible positions in which the divider
can be locked. Ensure the left and right dividers are
always locked in the same positions. The header
performs best for most crops with the dividers locked
in place.
Fig. 82 - Divider locking positions
If desired, the crop dividers can be unlocked in
order to allow them to ‘float’ up and down to follow
the terrain. See section
for
details.
Please be aware that floating dividers are prone to
dropping into holes or running into berms resulting
in damage to your header. Use this mode at your
own risk.
Summary of Contents for AirFLEX SDX 225
