Honey Bee Manufacturing Ltd.
2007 Grain Belt Plus Supplement
Grain Belt Plus Header Height Control
Installation and Adjustment
The header height control option uses a sensor assembly to measure changes in the vertical
displacement of the leaf springs (caused by varying terrain). These changes are
electronically relayed to the combines header height control, which compensates accordingly.
Initial Physical Adjustment and Set-up
1. Remove the feeder house cylinder safety lock, lower the header to its normal operating
height, and set the header tilt to the desired angle.
2. Raise the header, shut down the engine and wait for all moving parts to stop before
leaving the cab.
3. Set the feeder house lift cylinder safety locks in place.
4. With light pressure, manually move the sensor
arm down to the center of its range of motion.
Check that the clevis arm pin is set close to the
rear of the sensor arm while it is in this
alignment.
5. With the upper and lower stops at their outer
limits, move the sensor arm to its upper and
lower limits of travel.
6. If the type of sensor installed is adjustable, see
items 8 and 9 for sensor adjustment.
Rev. 01 - 04/25/08
17
Header Height Sensor - Components
Clevis Pin Adj.
Slide Pin Fully to Rear
of Sensor Arm Slot
When in Mid Range
Betw een Stops
Stops
Summary of Contents for Grain Belt Plus 3055
