Honey Bee Manufacturing Ltd.
2007 Grain Belt Plus Supplement
Setting the Automatic Reel Height (Safety Set Point)
The Safety Set Point can be programmed when the control
system is in Manual Mode.
To program the Safety Set Point, select Manual
Mode using the Control Mode button.
1. Use the combine controls to place the reel at a safe
distance from the cutter bar, place the header at cutting
height, then press and hold the Set button until the
display shows the message, "Set Point Stored."
2. Select Automatic Mode, using the Control Mode button to
return to normal operation.
3. Use the combine controls to raise the reel slightly until
the "Block" light goes out.
4. If the Automatic Reel Height control operation is not
satisfactory, refer to Adjusting Cutter Bar Sensors for
Reel Height Control.
CAN Communication:
The cab console and the controller use an advanced system called CAN to communicate.
When CAN communication is operating properly, the “Comm Active” indicator will be lit on the
cab console. If the communication link fails, this LED will be extinguished. Depending on the
type of failure, a diagnostic message may also be shown on the display.
Rev. 01 - 04/25/08
27
Cab Console - Reel Height
Summary of Contents for Grain Belt Plus 3055
