21
Installer setup
Installer settings allow you to customise how your system
works. Check the table on page 22 to see if any settings need
to be changed.
To change installer settings:
1
Set slider to
RUN
.
2
Press and hold the
OK
and
-
buttons together until the
screen displays “Set Installer OK?” Press
OK
to enter
installer setup mode and continue.
3
Press
OK
repeatedly to scroll through functions until you
find one you want to change.
4
Press the
+
or
-
buttons to change any setting, then press
OK
to save the new setting and advance to the next
function.
To exit installer setup at any time, move the slider switch
up, then back down to the
RUN
position.
1 :
12
1 :
24
SET INSTALLER OK?
CLOCK MODE
24 HOUR
Press and hold both
Press
OK
to begin
Press
+
or
-
to change setting
Function
number
Function
number
Setting
Setting
