RLV3150
33-00209ES—05
4
CONFIGURATION SETTINGS
Fig. 5.
Configuration switches are on the back of the faceplate. Factory settings are inside
gray cells.
1.
The thermostat buttons are dis-
abled and
appears on the
screen (see page 1) when the set-
tings are locked.
2.
Place at
Fan Yes
if you have a fan-
forced heater (to prevent prema-
ture burnout of the motor). Leave
at
No
for better temperature regu-
lation if you do not have a fan-
forced heater.
TEMPERATURE
DISPLAY AND
SETTING
The thermostat generally displays the
room temperature.
• To display the set temperature
(setpoint), press the
Up
or
Down
button once. The setpoint
temperature will remain on the
screen for 5 seconds.
• To change the setpoint temperature,
press the
Up
or
Down
button
repeatedly until the desired
temperature is displayed.
• The screen is backlit for 10 seconds
when any button is pressed.
#
Parameter
Up
Down
1
Settings lock
1
Lock
Unlock
2
Fan-forced heater
2
Fan Yes
No
3
Unit
°F
°C
