TUXEDOW INSTALLATION AND SETUP GUIDE
18
SETUP
From the
Setup
screen, you can make changes to the way the keypad is operating. Setup provides access to
System Info,
System Setup, System WIFI, Account, Disp & Audio Setup, Brightness and Volume.
System Information
To view the latest Software Version installed and the Interface name, on your system, touch the
Setup
System Info
icons.
ICON
ACTION
NOTES
1. Touch
Setup
>
System Info
icons.
2.Touch the Remote Upgrade Setup button to
Enable Remote Upgrade.
3.Touch Sync IP to Server to NEED This
information
Use the IP Address to enter on a PC, Smart Phone or
Tablet Browser.
WHAT DOES SYNC IP TO SERVER DO?
Over the Air Updates (OTA)
OTA requires a network connection and is initiated by AlarmNet 360. When the OTA screen appears on the TUXEDOW, the
user can accept, reject or postpone the download process. If
accepted
, the download process starts, and a message is
shown in the upper left corner of the screen. If
rejected
the process never starts. If
postponed
a dialog box will show in the
upper left showing the user to click the box to start the download process.
After download is completed the user must then accept, reject or postpone the download from being installed. Reject and
postpone are the same as above. If accept is pressed the TUXEDOW starts the updating process; once done, the TUXEDOW
resets.
System Setup
Touch the
Setup,
and
System Setup
icons to access
Time/Date Setup, CS Setup, User Setup, Advanced Setup,
Tuxedo Sync, User Profile, Quick Programming
and
Controller Initial.
See “
” section for detailed
information.
System WIFI
ICON
ACTION
NOTES
NOTE:
Supports 2.4GHz and 5GHz
frequencies
1. Touch
Setup
>
System WIFI
icons.
2. Select a Wi-Fi network from the list to
connect to. Or, select to add a new
Network connection. Enter the new
Network
name
SSID No
. and
Security
type; then
touch
Connect
.
3. Touch the
Setup
and
System
Info
icons;
the IP Address is displayed on the System
Information Screen. Enter the IP Address on
the keypad into a PC, Smart Phone or Tablet
Browser.
Use the Data Entry Keyboard to enter the required
information.
•
Use the
Shift
key for capital letters
•
Use the
BS
(Backspace) key to make corrections.
•
Touch
OK
•
Touch
abc
/
@#$
to switch between letters and symbols.
The TUXEDOW Keypads IP Address is used on a
standard web browser to control user functions such as
Security, Z-Wave operation, and camera viewing.
DHCP Setup
By default, the touchscreen is configured for DHCP. Once accessing
IP
, a list of available networks displays. Choose the
desired network and enter the Passphrase/Shared Key.
Summary of Contents for TUXEDOW
Page 6: ...iv ...
Page 55: ...TUXEDOW INSTALLATION AND SETUP GUIDE 49 NOTES ...