Honeywell Home TUXEDOW Installation And Setup Manual Download

Page: 50 / 56

TUXEDOW INSTALLATION AND SETUP GUIDE

Discovering Cameras

The camera discover icon allows you to discover network cameras (as long as they are connected to the same network as the

TUXEDOW).

ICON

ACTION

NOTES

1. Touch

Multimedia

, then

Camera

Touch Camera Discovery

and keypad says, “Discovering Camera’s please wait”.

Information window appears that says XX (where XX is the number of cameras it discovers) supported

cameras are associated for recording. You can change the association in Recording Settings screen.

Add/Editing Cameras Manually

ICON

ACTION

NOTES

1. Touch

Multimedia

, then

Camera

2. Touch

Add

Edit.

3. Enter the following fields

Camera Name

Model

IP Address

User Name

RTSP

Password

MJPEG

Resolution

Mobile

Frame Rate

RTSP Port

HTTP Port #

4. Press Save when complete and the TUXEDOW attempts

to connect to the camera.

Touch

Save

to save the data entered

Touch

Connect

to reconnect to the camera

Touch

Refresh

to reupload the settings from the

camera

Touch

Reset

to factory default the camera

Touch

TotalConn

to connect the Camera to Total

Connect.

Name

Description

NOTE: Must be alphanumeric only, no special characters (including space) are compatible.

Camera Name

Default is the Camera Model (abbreviated) X, where X= The Mac

NOTE

: Maximum # of cameras supported.

Camera IP Address

This is the address of the camera, which is assigned by the router

MJPEG Streaming URL

Fixed

RTSP

(Real Time Streaming Protocol) Port #. Select ports (554, (1024-65534))

Name

Description

NOTE: Must be alphanumeric only, no special characters (including space) are compatible.

Name

Description

NOTE: Must be alphanumeric only, no special characters (including space) are compatible.

Resolution

(Options are 160x120, 320x240, 640x480)

Select from 160 x 120, 320 x 240 or 640 x 480. For best performance set video resolution to 320 x 240,

8 frames per sec.

NOTE:

•

Model iPCAM-WL resolution is fixed at 320 x 240 or user can change to 640x480.

•

When setting the resolution to 640 x 480, the recommended frame rate is 8 frames per sec.

•

When setting the resolution to 320 x 240, the recommended frame rate is no more than 15 frames

per second.

Camera Model:

Select iPCAM-WI, iPCAM-WI2, iPCAM-WO, iPCAM-ACU, iPCAM-PT or IPCAM-PT2, WVC210, ,

iPCAM-WL.

NOTE

: Only the AlarmNet IP cameras will work with Total Connect Remote Services.

RTSP Streaming URL

Real Time Streaming Protocol, if using a Non-AlarmNet IP camera, this information will be retrieved

from the camera or the cameras interface page

Mobile Streaming URL

Fixed

HTTP Port

Default value = 80. To change enter valid port number (80 (1024-65534)).

NOTE:

Do not use ports 6665-6669 for camera HTTP configuration. These ports block MPEG

streaming and PT commands of Safari based PC and mobile devices

Frame Rate

Options are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, or 30.

User Name/Password

Administrative password to access the camera’s setup or viewing page.

NOTE:

Every camera manufacturer makes their cameras slightly different, so Resideo does not guarantee that TUXEDOW will

work with every camera that supports the above network and codec features.

If using Total Connect, press

TotalConn

to reset the camera for remote viewing. This programs the camera to default for

Total Connect compatibility. A pop-up window displays:

“

For remote camera viewing service, please contact your alarm

company and ask for Total Connect

service and provide the camera’s MAC ID XX:XX:XX:XX:XX:XX. Press continue

to prepare the camera for Total Connect service.”

Press

CONTINUE

CANCEL

. Pressing

Continue

provides a

confirmation window, which displays:

“

Do you want to reset the Camera?

”

Yes

. See

Remote Access

ection for

more information. Press

Save

when done. Use

Refresh

to update the screen, if necessary.

Summary of Contents for TUXEDOW

























































Search results

Summary of Contents for TUXEDOW

Reviews:

Related manuals for TUXEDOW

Brands by name

Popular brands

Honeywell Home TUXEDOW, Installation And Setup Manual

Search results

Summary of Contents for TUXEDOW

Reviews:

Related manuals for TUXEDOW

Brands by name

Popular brands