Mounting and Connection Instructions RF BUS-2 wireless receiver
22
Connecting the RF BUS-2 wireless receiver (Item no. 015600.01) to a hazard detection system requires the
following software version:
Requirements for the use of the radio communication devices listed in chapter 1.2:
Central software
MB12, HB/MB24, HB/MB48, MB100 as of V10.xx
(HB48 and MB100 with index .10)
MB-Secure as of V04.25
Programming software
WINFEM Advanced as of V12.xx
IQ PanelControl as of V04.25
1.4 Performance
features
!
2 radio bands: 433MHz / 868MHz
!
A total of 24 radio channels distributed over 2 radio bands
!
Each radio communication device has an unmistakable Unikat address
!
Permanent monitoring of the radio communication devices
!
Radio revision mode for determining the installation range
!
Connection to intrusion detection central units via BUS-2 coupling
!
Simple start-up by means of installation mode in WINFEM Advanced programming software
2.
Project planning information
2.1
General information on radio technology
2.1.1
System operation
The radio system works in the frequency ranges 433 MHz and 868 MHz. These ranges are intended for high-
frequency units, for industrial, scientific, medical, domestic and similar applications and radio systems for various
purposes. When operating the system, no interference protection from the above-mentioned units and radio
system can be guaranteed.
Operating information:
The receiver (RF BUS-2 wireless receiver) should be operated in an environment free of interferences, i.e., the
antenna should be placed as far as possible from interfering components, such as electric motors, computers,
pulsed electronic circuits, etc. Interferences reduce the useable sensitivity and thus the achievable range.
2.1.2
Construtional features
Different constructional features of the object to be monitored result in different attenuations of the radio waves.
Examples:
Wood, plaster
Gypsum plaster board, brickwork, pressed particle board
Summary of Contents for 015600.01
