26
Mounting and Connection Instructions Reader series "luminAXS"
1.3
Interfaces
RS-485:
Bidirectional interface with "Modulbus" protocol,
Interface range up to 2000 m
Clock/Data:
Unidirectional interface, TTL-level, 4 bit code according to DIN 9785, active = LOW
Interface range up to 200 m
Only the same interfaces can be used in one system (RS-485 or Clock/Data).
1.2
Performance features
-
Clear and logical operating concept.
-
Simple start-up.
-
Simple RS-485 address allocation, manual or automatic.
-
Automatic adjustment of transmission range.
-
By use of MIFARE DESFire EV1/EV2 readers extreme safety is available (see 2.2).
-
Synchronization of max. 3 readers installed close to one another.
-
Lighting ring. Colour, brightness and function programmable.
-
The reader is completely protected against humidity.
-
.
For use outdoors and indoors (-25 °C to +65 °C)
-
Simple assembly, surfaces of metal is possible.
-
The reader can be directly mounted on commercially available f.m. sockets (DIN).
Special keypad features:
-
Neutral labelling of LEDs and keypad.
-
Abrasion-resistant 10 key keypad with 6 additional functional keys.
-
Ta
.
ctile and acoustical acknowledgement
-
Night design with time-limited luminous background.
1.4
System conditions
*) only required for MIFARE DESFire EV1/EV2
IDS
RS-485
Clock/Data
IK3EU BUS-2 from V12.xx *)
ACS-8
from V09.xx *)
X
IK3 EU conv.
ACS-2 plus
X
Door contr. mod. BUS-2 from V12.xx *)
ACT
X
MB panels from V14.xx *)
Door controller RS-485
X
MB-Secure from V05.xx *)
AXS4Secure
from V05.xx *)
Foreign devices
Software
WINFEM Advanced from V14.xx *)
IQ MultiAccess
from V12.xx *)
IQ PanelControl from V05.xx *)
IQ SystemControl from V07.xx *)
Software
ACS
Interface
Device
Device
For installation in accordance with VdS / EN / SES regulations
interface RS-485 must be used.
For installation in accordance with VdS / EN / SES regulations
interface RS-485 must be used.
