SETUP & OPERATION
STEP 2: SET CALENDAR AND CLOCK
Once batteries are installed and the control pad is powered, the next step is to
begin by programming the clock and calendar.
READ ENTIRE DIRECTIONS
AND WRITE DOWN DATE/DAY/TIME BEFORE PROGRAMMING. NOTE
:
You must enter all information without delays. If the light goes off, you must
begin programming again.
1.
With the safe door closed and locked, press
the “
” key followed by the “
9
” key.
1.
The LCD readout will glow amber.
EXAMPLE
2.
Enter the Year – 2 Digits
2.
2010 =
3.
Enter the Month – 2 Digits
3.
February =
4.
Enter the Date – 2 Digits
4.
30
th
=
5.
Enter the Day – 1 Digit (see chart below)
5.
Monday =
6.
Enter the Hour – 2 Digits (see chart below)
6.
9:26 am =
7.
Enter the Minutes – 2 Digits
7.
9:26 am =
DAY
#
Monday
1
Tuesday
2
Wednesday
3
Thursday
4
Friday
5
Saturday
6
Sunday
7
HOUR
##
HOUR
##
HOUR
##
1:00 am
01
9:00 am
09
5:00 pm
17
2:00 am
02
10:00 am
10
6:00 pm
18
3:00 am
03
11:00 am
11
7:00 pm
19
4:00 am
04
12:00 pm
12
8:00 pm
20
5:00 am
05
1:00 pm
13
9:00 pm
21
6:00 am
06
2:00 pm
14
10:00 pm
22
7:00 am
07
3:00 pm
15
11:00 pm
23
8:00 am
08
4:00 pm
16
12:00 am
00
When correctly entered, the LCD
readout will stop glowing and should
display the information you just
programmed.
